 |
Screening Strategies > Texas Shaker Precision Screeners
The TEXAS SHAKER® is designed for precision screening and sizing in aperture ranges from ¾” to 75 microns. Its long stroke, slow-speed horizontal reciprocating motion promotes rapid stratification, and constantly changing velocities yield the highest throughput of undersize per cycle. All models are fully enclosed. Self-cleaning ball decks are standard. The QC models feature two-part screen decks, with independent ball racks and screen frames. Operating parameters for its straight-line horizontal motion are optimized at 1” stroke, 6 deg. deck slope and 475 cpm, producing peak acceleration of 3.2 g. The screen length is fixed at 10 ft., and widths range from 3’ to 8’. Multiple-deck configurations offer up to 1,000 sq. ft. of screen surface, arranged for single, double or three-screen separations.
 Download brochure For more information
The TEXAS SHAKER has been spotlighted in Powder Bulk Solids magazine.
Screening Strategies Division of Triple/S Dynamics, Inc., introduces a new lower-cost ECONOMY version of the legendary TEXAS SHAKER®.
Offered in sizes from 3’x6’ to 4’x10’, with one or two self-cleaning ball decks, the “E” model is mounted on fixed-end coil springs, and the full-width vibrator module comprises two independent unbalanced rotors, each driven by separate electric motors rotating in opposite directions. Utilizing the principle of inertial coupling, the resulting motion is a straight horizontal line, reciprocating at a total stroke of 3/4” at 545 rpm. As in the Standard and “QC” models, the rotors are mounted in spherical roller bearings in removable housings, but there are no coupling gears, and the bearings are individually grease-lubricated.
Capacities in most grain cleaning operations range from 2,000 bu/hr for both scalping and cleaning, with one scalping and one cleaning deck, to 4,000 bu/hr for cleaning or scalping only with two parallel screen decks.
|  |
